Repairing windows in Dubai since 2014
AluK Sliding and Balcony Door Repair in Dubai
In Dubai we fix AluK lift-and-slide doors SC156TT and SC140, SC95 and 67CL32 sliding doors, INFINEO sliders and 67ID balcony doors, using genuine AluK parts as an official partner. Adjustment with lubrication is 300 AED, a multi-point lock 700 AED. We agree the price before starting, give a 2-year warranty and reach you in about 30 minutes.
2014
Repairing since
2 years
Warranty on every job
24/7
Calls answered
AluK repairs we carry out
Nine jobs cover almost every AluK call-out in Dubai. Each is done with genuine AluK parts.
AluK by code: which door you have and what it needs
AluK marks its systems with codes. SC stands on sliding and lift-and-slide doors, TT means a thermal break, NI a non-insulated profile. Pick the group that matches your door.

SC156TT and SC140 lift-and-slide doors
- SC156TT
- SC140TT
- SC140NI
SC156TT carries panels of 300 or 400 kg, takes glass up to 50 mm thick and locks with concealed RC2 burglary-resistant locks. SC140NI is the heavy non-insulated version on a 140 mm frame.
What usually goes wrong
- Panel rests on the threshold and will not riseLifting mechanism worn under a 300 or 400 kg panelPrice at the door
- Concealed lock does not engageLocking points miss after the panel has settled700 AED
- Panels no longer meet squarely at the interlockCarriages need levelling so the 50 mm interlock closes300 AED

SC95, SC70 and 67CL32 sliding doors
- SC95TT
- SC95NI
- SC70
- 67CL32
SC95 exists as an insulated TT and a non-insulated NI version. 67CL32 is fitted both in new buildings and in renovation.
What usually goes wrong
- Panel rides up and leaves the trackRollers worn unevenly or brokenPrice at the door
- Latch does not catch when the door is shutLock worn or its keep has moved350 AED
- Water stands in the bottom trackDrain slots blocked, bottom sealer worn through350 AED

INFINEO S146LM minimal slider
- INFINEO S146LM
INFINEO S146LM is the premium AluK slider with a frameless look. Almost all of the panel is glass, so the running gear and the glass unit do the hard work.
What usually goes wrong
- Large panel is hard to get movingRunning gear worn under the weight of the glassPrice at the door
- Panel does not close flush against the jambPanel has tilted and needs levelling300 AED
- Glass unit cracked or cloudyNew unit made to size for the same panel1,000 AED / m²

67ID balcony doors
- 67ID
AluK 67ID is the door system used for all balcony doors of Burj Khalifa. On a high floor the wind loads the lock and the seals every day.
What usually goes wrong
- Balcony door will not stay latched in windLock worn, latch no longer holds350 AED
- Door rubs on the thresholdDoor has dropped and needs adjusting300 AED
- Handle droops and does not returnReturn spring in the handle is gone350 AED
Work out the price before we come
Prices from our fixed price list. The technician confirms them at the window before any work.
AluK repair price list
- Removal and Replacement of Wedge Gasket Seals50 AED / linear m
- Replacement of Aluminium Bottom Sealer350 AED
- Replacement of Double-Glazed Unit1,000 AED / m²
- Window Handle Replacement350 AED
- Multi-Point Lock700 AED
- Adjustment of the Mechanism and Lubrication300 AED
- Replacement of the Lock350 AED
- Multi-Point Lock with Top & Bottom Bolts1,500 AED
- Dismantling / Installation (Windows, Doors, Portals)550 AED / m²
Every listed price includes the work. Carriages and rollers for SC156TT, SC140 and SC95 are chosen by panel weight, so their price is given at the door.
AluK repair in Dubai, in detail
AluK designs and engineers aluminium window, door and facade systems. The group is headquartered in Luxembourg, and AluK Italia was founded in Verona in 1969. AluK has been active in the Middle East since 2001 and opened its Dubai branch in JLT in 2011, with its office in Preatoni Tower. The systems we repair:
- SC156TT. A thermal break lift-and-slide door for panels of 300 or 400 kg, with a 50 mm interlock, concealed RC2 locks and glass up to 50 mm.
- SC140TT and SC140NI. Sliding and lift-and-slide doors for large openings. NI is the heavy non-insulated version on a 140 mm frame.
- SC95TT, SC95NI and SC70. Sliding doors, insulated and non-insulated.
- 67CL32. A sliding system for new buildings and renovation.
- INFINEO S146LM. A premium minimal slider with a frameless look.
- 67ID. A door system. It was used for all balcony doors of Burj Khalifa.
If you cannot tell the code, send us a WhatsApp photo of the door closed and of its bottom track.
Dust, summer heat and sea air reach every door in Dubai. On AluK systems the result depends on the code on the profile:
- Carriages of SC156TT and SC140. They hold 300 or 400 kg each time the handle is turned. When they wear, the panel rises unevenly or not at all.
- Concealed RC2 locks. The lock sits inside the profile and has several locking points. A panel that has settled even slightly no longer lines up, and the handle stops short.
- The 50 mm interlock. If one panel leans, the two halves of the interlock stop closing along their full height and air gets through.
- Rollers of SC95, SC70 and 67CL32. Lighter doors are opened many times a day. Rollers wear on one side and the panel starts to climb out of the track.
- Bottom track and sealer. Drain slots fill up, water stands in the track and the aluminium bottom sealer wears through.
- NI profiles. A non-insulated frame passes the outside heat straight to the seals, which harden sooner than on TT versions.
- 67ID balcony doors. Wind on high floors works the latch and the handle loose and pushes dust past a tired seal.
- INFINEO S146LM glass. With so little frame, a cracked or cloudy unit is noticed at once and is replaced to size.
The concealed lock of an SC156TT door is rated RC2 together with its own locking points and keeps. Put a different lock in the same slot and the door may close, but it is no longer the burglary-resistant set AluK designed. Carriages are chosen for a 300 or a 400 kg panel, and one made for a lighter door wears out quickly under the heavier one. Window Repair UAE is an official partner and fits genuine AluK parts matched to the system code, so the lock, the carriages and the seals keep working as one set.
Send a message or call, requests are accepted 24/7. At your home the technician first reads the system code, then tests the lift, the lock, the rollers and the seals one by one. He names the fault and the price, and starts only after you agree. Adjustment, lubrication, a handle or a standard lock take one visit. Carriages, concealed locks and glass units are ordered for the exact AluK code and fitted on a return visit. You get a 2-year warranty on the repair. We have been doing this in Dubai since 2014.
Read more: sliding door repair covers rollers and tracks, hardware and lock repair covers locks and handles, glass replacement covers cracked and cloudy units, sealing and draught proofing covers gaskets on balcony doors. For other aluminium systems see aluminium window repair. Bookings are on the contact page.
Our work on site
Our technicians at work
Portfolio
Articles
Practical guides on window and door repair in Dubai: foggy glazing, soundproofing, sliding doors, seals and more. Written by our repair team.
Tell Us Your Problem
Select your issue and get a free quote in under 2 minutes.
- Fast Response We call back within 5 minutes
- Free Estimate No hidden charges, transparent pricing
- 2-Year Warranty All repairs backed by warranty
Brands we repair
Official partner of every brand below, with access to their genuine parts in the UAE.
Aluminium14
uPVC4
Frequently Asked Questions
Still have questions?
Call or WhatsApp us: we take calls
24/7, emergency callouts around the clock.
-
Yes. On 67ID doors we adjust the door for 300 AED, replace the lock or the handle for 350 AED each and renew gaskets at 50 AED per metre.
-
If the panel has only settled, adjustment with lubrication at 300 AED brings the locking points back in line. A worn multi-point lock is replaced for 700 AED, or 1500 AED for the version with top and bottom bolts.
-
TT is a profile with a thermal break, NI is non-insulated. The running gear and locks are repaired the same way. On NI doors we look at the gaskets more closely, because they take more heat from the frame.
-
Yes. A double-glazed unit is made to the size of your panel and costs 1000 AED per m². The technician measures the unit and its thickness at the first visit and the new one is fitted on the second.
-
Yes, and a small one if done early. We clear the drain slots and check the bottom sealer. Replacing the aluminium bottom sealer costs 350 AED.
Where We Work
Main Office
Pinnacle, Sheikh Zayed Road, Office 607, Al Barsha First, Dubai, UAE
Our offices in Dubai

