Repairing windows in Dubai since 2014
REHAU uPVC Window and Door Repair in Dubai
We repair REHAU uPVC windows and doors in Dubai: EURO-DESIGN 70 tilt-and-turn windows and balcony doors, SYNEGO SLIDE and SLINOVA sliders, as an official partner with genuine REHAU parts. Adjustment with lubrication costs 300 AED, a new handle 350 AED. The price is named before work starts, the warranty is 2 years, and a technician arrives in about 30 minutes.
2014
Repairing since
2 years
Warranty on every job
24/7
Calls answered
REHAU repairs we carry out
Nine jobs cover almost every REHAU call-out in Dubai. Each is done with genuine REHAU parts.
REHAU profile by profile: what the heat does to each
A window, a balcony door and a big slider age differently even in the same white uPVC. Pick yours to see its weak points and the repair price.

EURO-DESIGN 70 and ARTEVO windows
- EURO-DESIGN 70
- ARTEVO
EURO-DESIGN 70 is a 70 mm profile with five chambers and EPDM gaskets. REHAU makes it in the RAU-PVC 1476 formulation, used in the Middle East for many years and resistant to UV and heat. ARTEVO is a separate premium window system, 80 mm deep, with a profile reinforced with glass fibre.
What usually goes wrong
- Sash binds at noon, frees up at nightuPVC grows in the heat, clearances need resetting300 AED
- Sash hangs on one cornerTilt-and-turn gear worn, set is replaced2,500 AED / set
- Handle stops short of closedLocking points dry, handle mechanism worn350 AED

EURO-DESIGN 70 balcony doors
- EURO-DESIGN 70
The same profile is used for balcony and entrance sashes. A door sash is taller and heavier than a window sash, so it loads the hinges harder and drops sooner.
What usually goes wrong
- Door scrapes the thresholdSash has dropped, hinges are reset and greased300 AED
- Door locks only in the middleTop and bottom points of the multi-point lock miss700 AED
- Warm draught along the closed doorGasket dried out and pulled back from the corners50 AED / linear m

SYNEGO SLIDE sliding doors and SYNEGO lift-and-slide doors
- SYNEGO SLIDE
- SYNEGO lift and slide
SYNEGO SLIDE is a sliding door with a 156 mm frame and an 80 mm sash, up to 4 by 2.6 m. The REHAU lift-and-slide door is a separate SYNEGO product with a 190 mm frame. In both, the rollers or carriages under the sash carry a lot of glass.
What usually goes wrong
- Panel will not come off the sealLifting gear or carriages have given upPrice at the door
- Panel stops short of the frameDebris in the track, panel running out of line300 AED
- Large pane fogged insideDouble-glazed unit replaced, sash stays1,000 AED / m²

SLINOVA slimline sliding door
- SLINOVA
SLINOVA carries sashes up to 150 kg and locks at six points: steel hooks close into anodised aluminium keeps. If the sash sinks a little, the hooks miss the keeps.
What usually goes wrong
- Hooks do not catch, door stays unlockedSash height is off, hooks and keeps realigned300 AED
- Handle moves, hooks stay inSix-point lock worn, priced at the doorPrice at the door
- Sash is hard to pushRollers worn under a heavy sashPrice at the door
Work out the price before we come
Prices from our fixed price list. The technician confirms them at the window before any work.
REHAU repair price list
- Removal and Replacement of Wedge Gasket Seals50 AED / linear m
- Replacement of Aluminium Bottom Sealer350 AED
- Replacement of Double-Glazed Unit1,000 AED / m²
- Acoustic Double Glazed Unit Replacement1,200 AED / m²
- Window Handle Replacement350 AED
- Multi-Point Lock700 AED
- Adjustment of the Mechanism and Lubrication300 AED
- Replacement of the Lock350 AED
- Tilt-and-Turn Hardware Set (PVC & Aluminium)2,500 AED / set
- Dismantling / Installation (Windows, Doors, Portals)550 AED / m²
Prices are fixed and include labour. Hinges, carriages, lifting gear and the SLINOVA six-point lock are not in the price list, so they are priced at the window or door before work.
REHAU repair in Dubai, in detail
REHAU is a German family-owned group founded in 1948 in the Bavarian town of Rehau. Windows are the business of its REHAU Window Solutions division. REHAU makes the uPVC profile, and a local fabricator turns it into windows and chooses the hardware. The REHAU range for the UAE includes:
- EURO-DESIGN 70. A 70 mm, five-chamber profile with EPDM gaskets for tilt-and-turn windows, balcony doors and entrance sashes. Its RAU-PVC 1476 formulation has been used in the Middle East for many years and resists UV and heat.
- SYNEGO SLIDE and SYNEGO lift and slide. Two separate doors with an 80 mm sash: a sliding door with a 156 mm frame, up to 4 by 2.6 m, and a lift-and-slide door with a 190 mm frame.
- SLINOVA. A slimline sliding door up to 4 by 2.4 m with sashes up to 150 kg and a six-point lock.
- ARTEVO. A separate premium window system, 80 mm deep, with a glass fibre reinforced profile.
The REHAU name is usually pressed into the profile inside the rebate, where you see it with the sash open. A photo of it on WhatsApp tells us what to bring.
On a south-facing wall in the UAE the outer face of a frame heats past 80°C, and uPVC expands three to four times more than aluminium. These figures come from a homeowner's guide to uPVC windows in the UAE, and they explain most of our REHAU calls:
- Sashes that bind by day. The profile grows in the sun and the clearance to the frame closes up. The cure is to reset hinges and keeps for the hot state of the window.
- Gaskets. Even EPDM dries and shrinks under UV and daily temperature swings. It pulls back from the corners, and dust and warm air get in there first.
- Locks and keeps. When the sash moves, locking points stop meeting their keeps. The handle gets stiff, then a point breaks.
- Dry hardware. Fittings makers ask for a yearly check: tighten the fixing screws and grease every moving part and locking point with acid-free, resin-free grease. Dust in Dubai strips that grease sooner.
- Dark finishes. Dark colours heat up more than white, so coloured windows on sunny walls move the most.
The profile itself is rarely the problem. We replace seals, hardware and glass and leave the REHAU frame in the wall.
A REHAU gasket is shaped for the REHAU groove. A generic one sits too high or too low, and the sash either will not close or will not seal. SLINOVA has its own six-point lock with steel hooks and anodised aluminium keeps, and nothing else fits its sash. Tilt-and-turn hardware is different: the fabricator chose it, so we read the maker's mark on the sash and fit a set from that maker. As an official partner we have access to genuine REHAU parts for the profile itself.
We ask for a photo and which side the window faces. The technician checks the sash against the frame, the hinges, the locking points and the gaskets, then names a fixed price. You decide before any work begins. Adjustment, lubrication, handles and gaskets are done on the spot. Hardware sets, glass and SLINOVA or SYNEGO SLIDE parts are ordered and fitted on a return visit. The warranty on the work is 2 years.
Other uPVC brands are covered on uPVC window repair. Handles and locks are explained in window hardware and lock repair, shrunken gaskets in sealing and draught proofing, fogged glass in double glazing repair, big sliders in sliding door repair. Requests are taken 24/7 on the contact page.
Our work on site
Our technicians at work
Portfolio
Articles
Practical guides on window and door repair in Dubai: foggy glazing, soundproofing, sliding doors, seals and more. Written by our repair team.
Tell Us Your Problem
Select your issue and get a free quote in under 2 minutes.
- Fast Response We call back within 5 minutes
- Free Estimate No hidden charges, transparent pricing
- 2-Year Warranty All repairs backed by warranty
Brands we repair
Official partner of every brand below, with access to their genuine parts in the UAE.
Aluminium15
uPVC3
Frequently Asked Questions
Still have questions?
Call or WhatsApp us: we take calls
24/7, emergency callouts around the clock.
-
uPVC expands in the heat much more than aluminium, so a sash set with tight clearances binds when the frame is hot. The technician resets the hinges and keeps. Adjustment with lubrication costs 300 AED.
-
A full tilt-and-turn hardware set costs 2500 AED, a handle alone 350 AED. Many windows need neither: the technician tries adjustment and lubrication for 300 AED first and tells you honestly if that is enough.
-
In time, yes. EPDM gaskets dry and shrink under UV, and the gap opens at the corners. A new gasket costs 50 AED per metre.
-
SLINOVA locks with six steel hooks, and all of them must line up with their keeps. When the sash sinks on worn rollers, the hooks miss. We reset the sash height first and replace the lock only if it is worn.
-
Fittings makers ask for a check at least once a year: screws tightened, moving parts and locking points greased. One visit with adjustment and lubrication costs 300 AED.
Where We Work
Main Office
Pinnacle, Sheikh Zayed Road, Office 607, Al Barsha First, Dubai, UAE
Our offices in Dubai

