Repairing windows in Dubai since 2014
Alumil Window and Door Repair in Dubai
We repair Alumil SMARTIA and SUPREME sliding doors, lift-and-slide doors, folding doors and hinged windows in Dubai as an official partner, with genuine Alumil parts. Adjustment with lubrication is 300 AED, a new handle 350 AED. You hear the price before work starts, the repair carries a 2-year warranty, and a technician arrives in about 30 minutes.
2014
Repairing since
2 years
Warranty on every job
24/7
Calls answered
Alumil repairs we carry out
Nine jobs cover almost every Alumil call-out in Dubai. Each is done with genuine Alumil parts.
Find your Alumil series and its usual faults
Alumil names its systems SMARTIA and SUPREME. Choose how your door or window opens to see the series and what we fix on them.

SMARTIA and SUPREME lift-and-slide doors
- SMARTIA S560
- SUPREME S700
- SMARTIA M450
SMARTIA S560 and M450 are made both as sliding and as lift-and-slide doors, SUPREME S700 as lift-and-slide. Alumil makes its lift-and-slide mechanism in a standard version for sashes up to 200 kg and a heavy-duty one up to 400 kg, so it is picked by the weight of the sash.
What usually goes wrong
- Handle turns, sash stays downLift mechanism worn, the sash sits on its sealsPrice at the door
- Sash rumbles along the railRoller bearings worn, grit on the railPrice at the door
- Dust line along the bottom of the sashEPDM gasket flattened, brush seal worn down50 AED / linear m

Minimal and motorised sliding doors
- SUPREME S650 PHOS
- SUPREME S650 e-MOTION
- SUPREME S500 PHOS
- SMARTIA M630 PHOS
SUPREME S650 e-MOTION is the motorised version of S650 PHOS. On a motorised door we start with the mechanics: a blocked track or a tight roller stops the sash just as a drive fault does.
What usually goes wrong
- Motorised sash stops part-wayTrack blocked or rollers binding, checked on sitePrice on site
- Lock does not catchSash has settled and the hook misses its keep350 AED
- Sash is stiff to push by handDry rollers, track needs cleaning and setting300 AED

SUPREME and SMARTIA folding doors
- SUPREME SF85
- SMARTIA MF65
The leaves travel on carriers along the track and are joined to each other by hinges. They have to stay in one line, otherwise the last leaf does not meet the frame.
What usually goes wrong
- Leaves catch on each otherHinges between the leaves loose or wornPrice at the door
- Gap at the closing leafLeaves out of line, carriers need resetting300 AED
- Handle on the access leaf is slackHandle worn at the spindle350 AED

Hinged windows and balcony doors
- SMARTIA S67
- SMARTIA S77
- SMARTIA S85
- SUPREME S91
These are Alumil's hinged window and door series. The work is done by the hinges, the locking gear around the sash and the gaskets, and these are the parts we adjust or change. On SMARTIA S85 the sash opens outwards.
What usually goes wrong
- Tilt-and-turn sash stuck in tiltGear worn out, the hardware set is replaced2,500 AED / set
- Balcony door scrapes the thresholdHinges have dropped, sash is lifted and squared300 AED
- Whistling at the sash in windGasket has pulled back at the corners50 AED / linear m
Work out the price before we come
Prices from our fixed price list. The technician confirms them at the window before any work.
Alumil repair price list
- Removal and Replacement of Wedge Gasket Seals50 AED / linear m
- Replacement of Aluminium Bottom Sealer350 AED
- Replacement of Double-Glazed Unit1,000 AED / m²
- Acoustic Double Glazed Unit Replacement1,200 AED / m²
- Window Handle Replacement350 AED
- Multi-Point Lock700 AED
- Adjustment of the Mechanism and Lubrication300 AED
- Replacement of the Lock350 AED
- Tilt-and-Turn Hardware Set (PVC & Aluminium)2,500 AED / set
- Multi-Point Lock with Top & Bottom Bolts1,500 AED
- Dismantling / Installation (Windows, Doors, Portals)550 AED / m²
Prices include labour. Alumil rollers and lift mechanisms are chosen by sash weight, so their price is given at the door.
Alumil repair in Dubai, in detail
Alumil is a Greek maker of architectural aluminium systems, founded in 1988. Its UAE subsidiary was set up in 2007 to serve the Arabian Peninsula. The systems offered here carry the SMARTIA and SUPREME names:
- SMARTIA S560. An insulated door made both as sliding and as lift-and-slide, sealed with EPDM gaskets and brush seals.
- SUPREME S700 and SMARTIA M450. Lift-and-slide doors; M450 is also made as a sliding door.
- SUPREME S650 PHOS and S650 e-MOTION. A minimal sliding door and its motorised version.
- SUPREME S500 PHOS, SMARTIA M630 PHOS, S350 and M14400. Sliding doors.
- SMARTIA S67, S77, S85, M9660 and SUPREME S91. Hinged windows and doors.
- SUPREME SF85 and SMARTIA MF65. Folding doors.
- SUPREME SD115, SMARTIA SD77 and MD61. Entrance doors.
- SMARTIA M7, M35 and M78. Curtain walls on commercial buildings.
If you do not know your series, send a photo of the handle and the bottom rail on WhatsApp. That is usually enough to tell them apart.
Sand, heat and salt air reach every system in Dubai. On Alumil the wear shows in these places:
- Rollers under the sash. The weight of the sash rests on the rollers, and their bearings go first: the sash starts to rumble, then needs two hands.
- Lift mechanism. On M450, S560 and S700 the handle drives a mechanism inside the sash. When it wears, the handle still turns but the sash is not raised off its seals and drags across them.
- Anti-lift blocks. Some doors have them at the head to stop the sash being lifted out. If one shifts, it scrapes the top of the frame on every pass.
- EPDM gaskets and brush seals. The gasket flattens where the sash presses on it, the brush wears down along the rail. You notice it as a line of dust on the floor inside.
- Hinges and locking gear on S67, S77, S85 and S91. The sash drops on the hinge side and the lock points stop lining up, so the handle needs force.
- Folding door hinges on SF85 and MF65. One loose hinge puts the whole run of leaves out of line.
A misted or cracked glass unit is measured in the sash and replaced to size. The frame stays where it is.
Alumil has its own accessory catalogue. Its lift-and-slide mechanism comes in a standard version for sashes up to 200 kg and a heavy-duty one up to 400 kg. A mechanism that is too light for the glass will turn, but it will not raise the sash, and a roller of another shape does not sit properly on the rail.
As an official partner we order genuine Alumil parts by series and by sash weight. That way the door lifts, rolls and seals the way it did when it was new, and the repair is covered by our 2-year warranty.
We take calls 24/7. The technician opens and closes the door a few times, looks at the rail, the rollers and the handle gear, and tells you which part has failed and what it costs. Work begins only after you agree.
- Cleaning the rail, adjustment, lubrication, handles and standard locks are finished on the spot.
- Rollers, lift mechanisms and glass units are ordered for your series and fitted on a second visit.
More detail by job: sliding door repair, hardware and lock repair, sealing and draught proofing and double glazing repair. Offices and shops with Alumil curtain walls are covered on commercial window repair. Other aluminium brands are on aluminium window repair.
Our work on site
Our technicians at work
Portfolio
Articles
Practical guides on window and door repair in Dubai: foggy glazing, soundproofing, sliding doors, seals and more. Written by our repair team.
Tell Us Your Problem
Select your issue and get a free quote in under 2 minutes.
- Fast Response We call back within 5 minutes
- Free Estimate No hidden charges, transparent pricing
- 2-Year Warranty All repairs backed by warranty
Brands we repair
Official partner of every brand below, with access to their genuine parts in the UAE.
Aluminium14
uPVC4
Frequently Asked Questions
Still have questions?
Call or WhatsApp us: we take calls
24/7, emergency callouts around the clock.
-
For adjustment and lubrication, no. For parts, yes: rollers, lift mechanisms and gaskets are ordered by series. Send a photo on WhatsApp and the technician will work out which one you have before the visit.
-
Adjustment with lubrication is 300 AED, a handle 350 AED, a multi-point lock 700 AED and a new gasket 50 AED per metre. Rollers and the lift mechanism depend on the sash weight, so that price is given at the door before work starts.
-
Yes. We check the track, the rollers and the lock first, because a jammed sash is the most common reason a motorised door stops. If the fault is in the drive itself, the technician tells you on site and prices it there.
-
Yes. We are an official partner and order genuine Alumil parts for the exact series. Lift mechanisms are matched to the weight of your sash, which is why we look at the door before ordering.
-
Yes. On entrance doors we deal with locks, hinges and seals, and on curtain walls with opening windows, gaskets and glass units. A lock replacement is 350 AED, a double-glazed unit is 1000 AED per square metre.
Where We Work
Main Office
Pinnacle, Sheikh Zayed Road, Office 607, Al Barsha First, Dubai, UAE
Our offices in Dubai

