Repairing windows in Dubai since 2014
Alupco Sliding Door and Window Repair in Dubai
We repair Alupco doors and windows in Dubai: THERM and SARAYA sliders, GOSS lift-and-slide doors and THERM casements, as an official partner with genuine Alupco parts. Adjustment with lubrication costs 300 AED, a lock replacement 350 AED. The price is agreed at the door before work, the warranty is 2 years, and a technician arrives in about 30 minutes.
2014
Repairing since
2 years
Warranty on every job
24/7
Calls answered
Alupco repairs we carry out
Nine jobs cover almost every Alupco call-out in Dubai. Each is done with genuine Alupco parts.
Find your Alupco system and its usual faults
Alupco names its systems by family: THERM, SARAYA, GOSS, PIVOT. Open the tab that matches your door or window to see what fails in it and what the repair costs.

THERM sliding windows and doors
- THERM 83 SL
- THERM 97 SL
- THERM 123
THERM 83 SL and THERM 97 SL are sliding windows, and THERM 123 is made for both windows and doors. THERM 83 SL and THERM 123 have a thermal break, so less heat passes through the frame. The panels ride on bottom rollers, and the wear starts there.
What usually goes wrong
- Panel jolts and scrapes the trackRoller bearings seized, near the sea they corrodePrice at the door
- Key turns, door stays unlockedMulti-point lock worn, hooks do not throw700 AED
- Hot air where the two panels meetSeal between the panels worn thin50 AED / linear m

SARAYA sliding doors and windows
- SARAYA 100
- SARAYA 110
- SARAYA 120
SARAYA 100 is made for sliding doors, and SARAYA 110 and 120 for both doors and windows, all without a thermal break. On a sliding window the small rollers and the latch go first.
What usually goes wrong
- Sliding window sticks halfwayTrack packed with dust, rollers running dry300 AED
- Latch does not hold the sashLatch worn or its keeper out of line350 AED
- Rain gets over the bottom trackDrain slots blocked, drip sill missing350 AED

GOSS lift-and-slide doors
- GOSS
GOSS is the Alupco lift-and-slide system, made with and without a thermal break. The handle raises the panel on its bogies, and turning it back sets the panel down on the seal.
What usually goes wrong
- Handle turns, panel stays downLifting gear behind the handle has failedPrice at the door
- Panel rumbles as it rollsBogie wheels worn, track already markedPrice at the door
- Handle takes real force to turnGear and bogies need cleaning and grease300 AED

THERM casement windows, PIVOT windows
- THERM 56W
- THERM 60W
- THERM 64W
- PIVOT
THERM 56W, 60W and 64W are hinged windows with a thermal break. A PIVOT sash turns on a vertical or horizontal axis, so two pivots carry all the glass.
What usually goes wrong
- Door leaf drags on the thresholdHinges have dropped, leaf needs resetting300 AED
- Pivot window will not stay openPivots worn and no longer brake the sashPrice at the window
- Handle spins without moving the lockHandle worn out, replaced with a matching one350 AED

50 SG and CW 60 glazed facades
- 50 SG
- CW 60
50 SG is the Alupco system for structural and semi-structural glazing, and CW 60 is its curtain wall. In them we repair opening sashes, seals and glass.
What usually goes wrong
- Opening sash sits proud of the facadeStays bent or loose on their fixingsPrice at the window
- Line of dust on the sill belowSash gasket hardened and no longer seals50 AED / linear m
- Facade pane crackedSize and access checked, price given on sitePrice on site
Work out the price before we come
Prices from our fixed price list. The technician confirms them at the window before any work.
Alupco repair price list
- Removal and Replacement of Wedge Gasket Seals50 AED / linear m
- Replacement of Aluminium Bottom Sealer350 AED
- Replacement of Double-Glazed Unit1,000 AED / m²
- Window Handle Replacement350 AED
- Multi-Point Lock700 AED
- Adjustment of the Mechanism and Lubrication300 AED
- Replacement of the Lock350 AED
- Multi-Point Lock with Top & Bottom Bolts1,500 AED
- Dismantling / Installation (Windows, Doors, Portals)550 AED / m²
Listed prices cover the part and the labour. Rollers, GOSS bogies and lifting gear, hinges and pivots are not in the price list: the technician prices them at the door once the system and the panel weight are known.
Alupco repair in Dubai, in detail
Alupco, the Aluminium Products Company, has extruded aluminium in Saudi Arabia since 1975. Its head office is in Dammam and it keeps an office in Dubai. The company designs its own architectural systems, many of them with a thermal break. These are the families we repair:
- THERM 83 SL, THERM 97 SL and THERM 123. Sliding windows, and THERM 123 also comes as a door. THERM 83 SL and THERM 123 have a thermal break.
- SARAYA 100, 110 and 120. Sliders without a thermal break: SARAYA 100 for doors, 110 and 120 for doors and windows. SARAYA 40 is the casement window of the same family.
- GOSS. A lift-and-slide door, made in a thermal-break and a non-insulated version.
- THERM 56W, 60W and 64W. Hinged windows with a thermal break.
- PIVOT. Windows that turn on a vertical or horizontal axis.
- 50 SG and CW 60. Facade systems: 50 SG for structural and semi-structural glazing, CW 60 for a curtain wall.
The family name is rarely printed on the frame. A photo of the track and of the panel edge on WhatsApp is enough for us to tell THERM from SARAYA.
Most Alupco systems in homes are sliders, so most of our work is at floor level:
- Roller bearings. Dust settles in the track and works into the bearings. In homes near the sea the bearings also corrode, and the panel starts to jolt.
- Tracks. A seized roller stops turning and slides. It leaves a flat groove in the track, and then a new roller alone no longer cures the door.
- GOSS lifting gear and bogies. The handle drives a gear that raises the panel onto its bogies. When the gear fails, the panel stays on the seal and nobody can move it.
- Locks on sliding panels. The hooks must enter their keepers at an exact height. A panel that has sunk on worn rollers misses them.
- Seals between panels. Once they wear thin, hot air and dust pass straight through the middle of the door.
- Hinges and pivots. THERM sashes drop on their hinges, PIVOT sashes stop holding their position.
So a lock that will not close is often a roller problem. The technician checks the height of the panel before touching the lock.
Each Alupco family has its own track and its own roller housing. A roller that is a little taller or shorter than the original changes how far the panel overlaps the frame, and then the hooks of the lock and the seals between the panels stop lining up. On GOSS the bogies have to match the lifting gear, or the panel will not rise evenly. As an official partner we fit genuine Alupco parts, so the door goes back to the height and overlap it was made with.
- You describe the fault and send a photo. We take requests 24/7.
- The technician lifts the panel out or opens the sash, cleans the track and checks rollers, lock and seals.
- You get the price for each item before anything is replaced.
- Adjustment, lubrication, handles and standard locks are finished the same visit. Rollers and GOSS parts for your system are brought on a second visit.
- The repair is covered by a 2-year warranty.
More on stuck panels is on the sliding door repair page, on locks in window hardware and lock repair, on gaps and dust in sealing and draught proofing. Villa owners can start from villa window repair, and other makes are listed under aluminium window repair. Book through the contact page.
Our work on site
Our technicians at work
Portfolio
Articles
Practical guides on window and door repair in Dubai: foggy glazing, soundproofing, sliding doors, seals and more. Written by our repair team.
Tell Us Your Problem
Select your issue and get a free quote in under 2 minutes.
- Fast Response We call back within 5 minutes
- Free Estimate No hidden charges, transparent pricing
- 2-Year Warranty All repairs backed by warranty
Brands we repair
Official partner of every brand below, with access to their genuine parts in the UAE.
Aluminium14
uPVC4
Frequently Asked Questions
Still have questions?
Call or WhatsApp us: we take calls
24/7, emergency callouts around the clock.
-
On GOSS the handle lifts the panel before it slides and lowers it onto the seal when you close. THERM and SARAYA panels slide straight away. If you are not sure, send a photo of the handle and the track.
-
Rollers are priced at the door, because the type depends on the system and on the weight of the panel. Cleaning the track with adjustment and lubrication costs 300 AED, and sometimes that is all the door needs.
-
Salt air corrodes the roller bearings, and dust fills the track. The rollers stop turning and the panel is dragged instead of rolled. We clean the track and replace the rollers with genuine Alupco ones.
-
No. The lifting gear or the bogies have failed, and both can be replaced. The frame, the panel and the glass stay in place.
-
A standard lock costs 350 AED, a multi-point lock 700 AED, a multi-point lock with bolts 1500 AED. The technician first checks whether the old lock only needs the panel height reset.
Where We Work
Main Office
Pinnacle, Sheikh Zayed Road, Office 607, Al Barsha First, Dubai, UAE
Our offices in Dubai

