Whether the head above can carry a top-hung set, or the floor needs a rolling track, shows up on camera; we pick the folding system and the survey slot from that.
1The openingWide enough to show the beam over the opening and both side walls.
2The floor at the openingLow down, so tiles, steps and any old channel are clear.
3Rough width and heightOne rough reading across helps us count the panels; precise figures come on the visit.
Beam, floor and width in one chatThe measuring visit for a folding door is free.Send the bifold photosCall
Get a free consultation from our window experts. No obligations.
Other door work
Sliders, repairs and other door jobs from the crew that hangs folding sets, two years of cover too.
Bifold and Folding Door Installation in Dubai: in detail
Count the moving parts on a bifold and it beats every other door in a villa: wheel carriers, the pins it pivots on beside the jamb, floor guides, and one more hinge for each pair of leaves. The whole set hangs off the pivot line, so a frame that is out of square by a few millimetres shows up as a panel that drags at the far end. Most openings in finished buildings are not perfectly true, which is why the set is made to the survey readings and the frame is packed until it is square before any panel goes in.
On a top-hung set, carriers run in a track overhead and the floor channel only guides the panels. The head of the opening carries the load, so we check what it is fixed into before we commit. On a bottom-rolling set, rollers in the floor track take the weight. Sunflex SF55, for example, carries its leaves from below on stainless steel carriages. Interior accordion doors and folding room dividers are almost always top-hung, with no floor channel at all.
The track is set level along its full length and the jamb pivots plumb. Panels are hung, then the folding sequence is timed so each one tucks behind its neighbour and the set parks as a neat pack. Intermediate hinges are fixed firmly into the panel edges, and the flush bolts and handle on the access panel are adjusted so the door latches without force. Outside, the threshold drains water away, and a door facing driven rain gets extra waterproofing. Glass panels are tempered safety glass wherever UAE rules require it.
We are an official partner of Sunflex, maker of the SF55 and SF75 folding doors, and of Alumil and Reynaers, which make aluminium folding doors including Reynaers ConceptFolding, with access to genuine parts in the UAE.
Locking the entry leaf with a multi-point lock costs 700 AED. A terrace opening that takes wind-driven rain gets added waterproofing at 100 AED per m². Years on, adjusting and greasing the folding gear on a service visit is 300 AED. We can put in office partitions once staff have left, and the folding set, labour and production time are all written into your quote.
If your folding door sticks mid-fold or hangs low at one side, new carriers, pins or guides normally sort it without replacing the set: see accordion and bifold door repair and, for Sunflex systems, Sunflex repair. If a sliding wall suits your opening better, compare it on sliding door installation. The wider replacement process is on window installation in Dubai. We have hung folding doors around Dubai since 2014 and talk to clients in eight languages.
Brands we repair
Official partner of every brand below, with access to their genuine parts in the UAE.
Aluminium15
uPVC4
Frequently Asked Questions
Still have questions?
Call or WhatsApp us: we take calls 24/7, emergency callouts around the clock.
Fitting a bifold costs 550 AED per m². What the folding set costs turns on its width, the number of leaves, the system and the glass, and you get that figure on paper after the free survey.
A bifold folds its panels into a pack at the side, so almost the whole opening clears. A sliding door keeps at least one panel in the opening but has fewer moving parts.
Yes. Top-hung accordion doors and folding partitions are fitted in homes and offices, and business premises can be done outside working hours.
Top-hung keeps the floor channel light but needs a strong head above the opening. Bottom-rolling puts the weight on the floor track. We decide after checking the structure.